GUTMANN CARTA 7500 Notice De Montage page 44

All manuals and user guides at all-guides.com
EN
12. Carry out functional test, remove foil.
For canopy with tower see up to item 15.
ONLY FOR HOODS WITH
TOWER !
13. Bend the retaining notches on the upper tower approx. 2-3mm outwards. Remove
the foil from the wall surfaces.
14. Push the upper tower into the retaining bracket of the tower suspension until it
engages.
15. Widen the lower tower a little to the outside and place it over the upper tower and
the module of the extractor hood. The lower tower must rest on the hood.
44