juicer slowly squeezes the ingredients to extract the juice and needs some time to
extract juice from the last ingredients.
9. When the juice starts to fill the bowl, open up the juice cap to release it. Place the
juice container, a glass or another appropriate container under the juice outlet.
Open the juice cap to let the juice run freely out from the bowl.
•
The bowl may fill very quickly with juice, depending on the type of ingredients
used.
•
For ingredients that produce many bubbles such as cabbage and apple, keep the
juice cap open during extraction.
10. You can easily make mixed fruit juice or vegetable juice with various ingredients.
•
•
11. After extraction is competed, turn the function knob to " " position to clean the
juicer for 2-3 minutes.
12. After the self clean completes, turn the function knob to the "
stop. For performance and safety, the juicer takes time to stop completely even
when the function knob is at "
Important: When the juicer suddenly stops during the operation:
1. Revolve the function knob to the "
2. Turn the function knob to the " " position so that ingredients stuck in the juicing
screw can be pushed upwards.
3. Use the " " function about 3-5 seconds and stop it. Repeat 2-3 times.
Note: When the juicer is in " " mode, hold the chute lightly with your hand. After
the above operation, if the juicer still does not operate, disassemble the juicer and
wash it completely.
Close the juice cap and set " " or " " mode to start.
Open the juice cap to pour out as much juice as required. You
can close it again without any drips.
" position.
" position.
" position to
23
V.1.0
operation