essentiel b EEXJ3 Notice D'utilisation page 21

4. Install the juice strainer into the bowl to make juice;
install the ice cream strainer into the bowl to make
ice cream.
Turn the strainer to install it, until the strainer base
goes completely into the bowl.
5. Install the juicing screw into the centre of the bowl
for juicing. Press on the juicing screw and turn it to
install it.
6. Install the chute onto the bowl. Line the
the chute up with the  symbol on the bowl. Turn
the chute clockwise so that the
chute lines up with the  symbol on the bowl.
7. Insert the pusher into the chute.
8. Place the pulp container under the pulp outlet and
the juice container under juice outlet.
9. Make sure that all the parts of the appliance are
correctly assembled, then connect the power cord
of the juicer to a suitable electrical outlet.
Note: The juicer is fitted with a safety mechanism to
prevent it starting if the chute and bowl are not fixed
in the correct position.
10. To disassemble the juicer, reverse the steps above.
operation
Caution: Before starting, adjust the seasoning valve to the appropriate location.
Do not adjust the seasoning valve during usage.
Below fruit and vegetable correspond to seasoning valve:
• Soft fruit and vegetables: orange, watermelon, red grape, cucumber, tomato, etc.
Note: Adjust the seasoning valve on soft fruit when making ice cream.
•
Hard fruits and with fiber-rich ingredients: apple, pear, celery, carrot,
pomegranate, pineapple, etc.
symbol on
symbol on the
Soft fruits / Hard fruits
Surround the top of
the screw
21
V.1.0
operation