Technical characteristics
•
model number: EEXJ3
•
Rated voltage: 220-240 V~, 50/60 Hz
•
Power consumption: 200 W
•
Bowl capacity: 0.45L
•
Capacity of the pulp container: 1L
•
Capacity of the juice container: 1L
•
Operation: 20 minutes of usage/20 minutes of break
Packaging content
•
1 x Base
•
1 x Pusher
•
1 x Chute
•
1 x Juicing screw
•
1 x Juice strainer
•
1 x Ice cream strainer
•
1 x Bowl
•
1 x Juice container
•
1 x Pulp container
•
1 x Cleaning brush
•
1 x User guide
installation
Caution: Before assembling the juicer, make sure that the function knob is in the
position.
1. Place the base on a flat, stable, and dry surface.
2. Before starting, put the control valve on the bowl base into the "Hard fruits"
position.
Note: The seasoning valve must be
installed in place. Otherwise, fluid leakage
might occur.
3. Place the bowl onto the base. Make sure
that the bowl is fully inserted into the motor
shaft on the base. Line the bowl up with
the fixed point on the base. Turn the bowl
so that it locks in this position.
20
V.1.0
installation
Two fixing points