Aligning The Flat Screen; Warranty And Liability - Goobay ScreenScope Mode D'emploi

Fig. 21: Laying the cables
End of installing. To remove, proceed in reversed order.
5 Aligning the flat screen
Tab. 21: Aligning the flat screen
Fig. 22:

Aligning the flat screen

6

Warranty and liability

• T he producer grants a 2 years warranty to a new device.
• As the manufacturer has no influence on installation, warranty only applies
to the product itself.
• If any fault or damage is detected on your device, please contact your dealer
and provide your sales slip or invoice as evidence of the purchase, if
necessary. Your dealer will repair the fault either on site, or send the device
to the manufacturer. You make the work of our technicians considerably
easier, describing possible faults in detail – only then you can be assured
that faults, occurring only rarely, will be found and repaired with certainty!
• The manufacturer is not liable for damages to persons or property caused by
Risk of injury by moving product parts
>> Do not hold limbs between shear parts
during use.
>> Mind the mobility of the product during
use. This may move away from the wall
or towards it and swivel sideways.
1. S elect sufficiently long cables
to ensure the mobility of the
flat screen.
2. Pin the cables into the cable
guides as shown.
A lign the flat screen as needed
>> Vertically,
>> Horizontally and / or
>> From the axis of rotation.
25