Adjusting The Pole Assembly; Flat Screen Mounting - Goobay ScreenScope Mode D'emploi

User's Manual
4.3

adjusting the pole assembly

Fig. 14: Adjusting the pole assembly
Fig. 15: Fixing the VESA Plate
4.4

Flat screen mounting

Tab. 18: Mounting the flat screen
22
Allen key 5mm
F
Risk of injury by tripping and falling
>> Place, transport and install product, parts
and acceories in a safe way.
Risk of material damage by improper
procedure
>> Only use moderate force when tightening
the screws in order to avoid damaging
threads.
>> NEVER set the screen on the front during
installation!
>> Do not damage the flat screen by too
long screws.
Allen key 3mm
1. Loosen the Allen screw a few by
turning it counterclockwise.
2. Adjust the preferred height.
In this case act by the size of your flat
screen.
3. Fix the Allen screw with the VESA
Plate holder by turning it clockwise.
F
D