Publicité
Les langues disponibles
Les langues disponibles
BEFORE USE
Before you begin
Setting the clock
• Open the door and remove the packaging material.
• Do not use the microwave oven when it is damaged, but contact
the manufacturer.
• Remove the protection foil from the outside of the microwave oven.
• Clean the inside of the oven and the accessories with a damp cloth.
Do not use abrasive cleaners or any strongly smelling detergents.
• Place the turntable in the middle of the microwave oven with the
indentation for the driving mechanism downwards.
• The microwave oven may not be used without the turntable.
When the power is first supplied to the microwave oven, you must set
the clock. In the display '00:00' will blink. The clock will work as long as
the microwave oven is connected to the mains.
1. Turn the selection button to set the right time (between 00:00 and
23:59).
After you have set the right time, you will hear a beep and the time
stops blinking. The clock has been set.
Notes
• If you want to change the time later on, you have to press and hold
the clock button. The actual time disappears and then the time will
blink in the display.
• Turn the selection button to set the new time and press the clock
button again to confirm the setting.
If you do not want to see the clock in the display, press the clock
button briefly. The time disappears. Press the clock button again,
and the clock appears in the display again.
EN 7
Publicité
