Troubleshooting - Cresta BBM012 Mode D'emploi

6 Troubleshooting

Faults
Units cannot be
turned on.
The green Link"
light on the Parent
Unit is flashing
and you cannot
hear the sounds
from your baby's
room.
Can't hear your
baby on the
Parent Unit, but
the Link" light is
still glowing
steadily.
Your Baby Monitor
is emitting an high
pitched
ear−piercing noise.
Causes
− Check that you have turned the power on from the mains and that the
connections are firm.
− 1. You may have moved out of range −move closer to the Baby Unit and
wait 5 seconds for the Link" to establish.
− 2. You may need to re−establish the Link" between the two units. Turn both
units off and then:
On the Baby Unit:
−Press and release the On/Off key.
On the Parent Unit:
−Press and release the On/Off key. The green Link" light comes on (this
may take a few seconds).
− 1. Check the volume is turned up on the Parent Unit.
− 2. You may need to turn up the sensitivity of your Baby Monitor.
− This may happen if your Parent and Baby Units are too close together.
Move them further apart.
English
12