Parent To Parent Paging; Talk To Your Baby; Night Light; Torch - Cresta BBM012 Mode D'emploi

2. Use the Up/Down Keys to scroll to [Degree F?]. Press the OK Key to select Fahrenheit or
Menu Key to exit without change. Display will briefly show [Saved]. The temperature of your
babys room will now be shown in degrees Fahrenheit.
3. If you wish to change the temperature display back to degrees Centigrade, follow the above
steps. At step 2 the display will show [Degree C?]. Press the OK Key.

Parent to parent paging

Useful if one parent is in the baby's room and needs to contact the other. Also helps to find a mislaid
Parent Unit.
At the Baby Unit
1. Press and hold the Page Key for 2 seconds. The Parent Unit will emit a tone.
At the Parent Unit
1. When the Page tone sounds you can silence it by pressing any key on the Parent Unit.
2. If you wish, you can then speak to your partner in the baby's room. Press and hold the Talk Key
and speak into the front of the Parent Unit. Release the Talk Key and you can hear what is said
in the baby's room again.

Talk to your Baby

You can speak to your baby from the Parent Unit −perhaps to re−assure them that you are on your
way.
At the Parent Unit
1. Press and hold the Talk Key and speak into the front of the Parent Unit. Release the key to hear
your baby again.
Please note that you will not be able to hear your baby while you are speaking to
them until you release the Talk Key again.

Night Light

The Baby Unit has a one touch night light which emits a soft starry glow, providing comfort and
re−assurance for your baby and allowing you to see them in a darkened room. You may also turn the
night light on and off from the Parent Unit.
At the Baby Unit
1. Press the Light Key on the top of the unit. A soft light will gently turn on. Press again and the light
will fade away.
At the Parent Unit
1. Press the Menu Key, then use the Up/Down Keys to scroll to [Night Light]. Press the OK Key.
2. The Display will show [On?] (asking if you would like to switch the night light on). Press the
OK Key. The display will briefly show [Saved] and gives a confirming beep". The night light on
the Baby Unit will gently turn on. A lightbulb icon will appear on the Display of the Parent Unit to
let you know the night light on the Baby Unit is on.
3. To turn the night light off again from the Parent Unit, follow the above steps. The Display will show
[Off?]. Press the OK Key. The Display will briefly show [Saved] and gives a confirming beep".
The lightbulb icon will disappear.

Torch

Your Parent Unit has a useful Torch feature. At the press of a button a soft beam of light is emitted
from the top of the Parent Unit − helpful when peeping into a darkened room to check on your baby.
English
9