Time For A Feed; To Set The First Or Next Feed Time; To Set The Interval For Following Feeds; To Turn The Feed Alarm On - Cresta BBM012 Mode D'emploi

At the Parent Unit
1. Press and hold the Torch Key (indicated by the lightbulb icon above the Display) to turn the light
on. A soft beam of light will turn on.
The torch only works whilst the Parent Unit is turned on.

Time for a Feed

If your baby is in a routine of regular feeding intervals, you may wish to set your Baby Monitor to alert
you when your baby's feeds are due. You have the choice to either set an alert just for your baby's
next feed time, or for your baby's next feed time plus subsequent feeds based on the interval time
between them.
Firstly you will need to ensure that you have set the date and time on your Parent Unit's inbuilt clock.
Once you have done this, you can either:
1. Set the Time of day or night (24hr clock) at which your baby's next feed is due (eg. 10.30) and
then if you wish,
2. set the Interval between your baby's following feed start times, (eg. every 3hrs 30mins) − be sure
to include the time it takes to feed your baby.
3. Finally, you will need to switch the Feed Alarm on. Now, when your baby's next
feed is due, your Parent Unit will start beeping and the Display will show [Feed Alarm]. Pressing
any button on the Parent Unit will silence the alert and you can feed your baby. If you have set the
interval, the alert will sound again when the next feed is due.

To set the first or next feed time

At the Parent Unit
1. Press the Menu Key, then use the Up/Down Keys to scroll to [Feed Time]. Press the OK Key.
2. The Display shows [Set time]. Press the OK Key.
3. The Display shows [Hour] and a number between 00 and 23, representing hours of the day. Use
the Up/Down Keys to scroll to the hour of your baby's feed. Press the OK Key.
4. The Display shows [Minute] and a number between 00 and 59, representing the minutes of an
hour. Use the Up/Down Keys to scroll to the minutes past the hour of your baby's feed. Press the
OK Key. The Display briefly shows [Saved] and the time of your baby's first feed is stored.

To set the interval for following feeds

At the Parent Unit Follow steps 1−4 above then,
5. The Display shows [Set Time]. Use the Up/Down Keys to scroll to [Set Interval]. Press the
OK Key.
6. The Display shows [Hour] and a two digit number representing the hours between your baby's
feeds. Use the Up/Down Keys to scroll to the hour between your babys feeds (e.g. 03) Press the
OK Key.
7. Display shows [Minute]. Use the Up/Down Keys to scroll to the minutes after the hour between
your baby's feed's (eg. 30) Press the OK Key. Display briefly shows [Saved] and the interval
between your baby's feeds is stored (in this case as 3hrs 30mins).
When calculating feed interval, please remember to include the time it takes to feed your baby.
Please remember to turn the alarm on as detailed in the next section.

To turn the feed alarm on

At the Parent Unit Follow steps 1−7 then,
8. The Display shows [Set Interval]. Use the Up/Down Keys to scroll to [Set Interval]. Press the
OK Key to set or the Menu Key to exit without change.
9. The Display shows [On?]. Press the OK Key.
English
10