Operating The Charger - Spektrum S1200 Manuel D'utilisation

Operating the Charger

Before operating the charger, know your battery's specifications and any
battery-specific safety warnings.
1. Connect an appropriate power supply to the INPUT side of the charger.
Refer to the Input Voltage in the Speciications table for more information.
The charger will initialize and display the home screen, indicating the
charger is ready to charge.
2. Connect the battery to be charged to the OUTPUT side of the charger.
3. Connect the battery balance lead, if available, to the charger balance port.
4. Press and release the menu button to display the Task Settings list:
Task
Battery Type
Battery Voltage Set the individual cell ending voltage
Cell Count
Current
Start
Back
arkt24.ch; arkt24.ch;
Task Settings
Charge, Discharge, Storage
Select the appropriate battery chemistry
Set the number of cells in the battery (this value auto-
detects if using a Spektrum™ SMART battery or if the
battery balance lead is connected to the balance port)
Set the charge current
Start the task cycle
Return to the home screen
www.model www.model
11
EN