10 www.aeg.com
0 www.aeg.com
BEFORE FIRST USE
INSTALLING WATER LINE
1.
For models with Automatic Ice
Maker
– The water pressure should be
2.0~12.5 kgf/cm2 or more to run
the Automatic Ice Maker.
– Check your tap water pressure. If a
cup of 180 cc is full within 10 sec-
onds, the pressure is appropriate.
– If the water pressure is not high
enough to run the Automatic Ice
Maker, call the local plumber to get
an additional water pressure pump.
2.
When installing the water tubes, en-
sure they are not close to any hot sur-
faces.
3.
The water filter only "filters" water. It
does not eliminate any bacteria or mi-
crobes.
4.
The filter life depends on the amount
of use. We recommend you replace
the filter at least once every 6 months.
When attaching the filter, place it for
an easy access (to remove and re-
place) .
5.
After installing refrigerator and water
line system, select WATER on your
control panel and press it for 2–3 mi-
nutes to supply water into the water
tank and dispense water.