Samsung HW-A40M Manuel D'instructions page 27


PAIR
Bluetooth
PAIR
SOUND
MODE

Play / Pause

VOL WOOFER
SOUND
Up/Down/
MODE
PAIR
Left/Right
SOUND
MODE
VOL WOOFER
VOL WOOFER

Sound Control
Press the PAIR button. "BT PAIRING" appears in the Soundbar's display.
You can connect the Soundbar to a new Bluetooth device in this mode by selecting the
Soundbar from the Bluetooth device's search list.
Press the p button to pause a music file temporarily.
When you press the button again, the music file plays.
PAIR
Press Up/Down/Left/Right on the button to select or set functions.
• Repeat
To use the Repeat function in "USB" mode, press the Up button.
• Music Skip
Press the Right button to select the next music file. Press the Left button to select the
previous music file.
• ID SET
Press and hold the Up button for 5 seconds to complete ID SET (when connecting to a
wireless subwoofer or wireless rear speakers).
When pressed, the settings TREBLE, BASS, and AUDIO SYNC are displayed in sequence.
The desired settings can be adjusted using the Up/Down buttons.
• To control the volume of the treble or bass sound, press the
to select TREBLE or BASS and then adjust the volume between -6~+6 by using the Up/
Down buttons.
• Press and hold the
for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are
selectable using the Left/Right buttons and each can be adjusted to a setting between
-6 to +6 using the Up/Down buttons. (Make sure the Sound mode is set to
"STANDARD".)
• If the video on the TV and audio from the Soundbar are not synchronized, press the
(Sound Control) button to select AUDIO SYNC and then set the audio delay
between 0~300 milliseconds by using the Up/Down buttons. (Not available in "BT" and
"USB" mode.)
• AUDIO SYNC is only supported for some functions.
PAIR
SOUND
MODE
Press the indicated areas to select Up/Down/Left/Right.
(Sound Control) button for about 5 seconds to adjust the sound
ENG - 21
(Sound Control) button