2. Snap the cradle onto the arm
3. Slide the locking lever
base to the unlocked position.
4. Slide the disk on the bottom
of the arm into the base until it
clicks.
5. Slide the locking lever to the
locked position.
6. Fit the bottom of the device into
the cradle.
7. Tilt the device
snaps.
dēzl 560 Quick Start Manual
➍
on the
➎
➎
back until it
➏
.
➏
8. Plug the other end of the vehicle
power cable into a power outlet in
your vehicle.
After you have connected the
device to vehicle power, the
following occurs.
• The device turns on.
• The device acquires satellite
signals. When at least one of
the
device has acquired satellite
signals.
NOTE: The device may need
a clear view of the sky to
acquire satellite signals.
bars is green, your
EN-3