Package Contents; Description Of The Product; Switching On The Collar; Switching Off The Collar - Num'axes CANICALM PREMIUM Guide D'utilisation

Package contents

- a collar equipped with short contact points
- a 3 Volt CR 2 lithium battery
- a pair of long contact points

Description of the product

Setting screw for barking
detection sensitivity
Diagram. 1
Screwdriver

Switching On the collar

- Remove the 4 screws from the battery cover.
- Remove the battery cover.
- Insert the 3 Volt CR 2 lithium battery paying attention to the polarity indicated on the battery housing
(See diagram 1).
- Sound beeps are emitted indicating the collar is ready to use.
If you do not hear any sound beep after inserting the battery, immediately remove it from its housing.
Check the polarity before inserting the battery once again.
- Replace the battery cover.
- Retighten moderately the 4 screws.

Switching Off the collar

To switch Off the collar, remove the battery from its housing.
- a neon test lamp
- a screwdriver
- this user's manual
Polarity "-" of the battery
Button to change operating
mode
Polarity "+" of the battery
Gb - 12