Continuous drainage
If you often use the device to dehumidify the air, you can also use the continuous drainage.
1. Turn off the device and pull the plug from the
socket.
2. Unscrew the lid and plug from the continuous
drain hole (figure 1 No. 6), see figure 7.
3. Connect a drainage hose (not included) to the
continuous drain hole (zie figuur 7), and make
sure the end of the hose is placed in a bucket,
or other kind of collection tray.
4. Use the device as prescribed in this manual.
CLEANING AND MAINTENANCE - Cleaning the filter
For an optimal result, you have to clean the 4 filters every two weeks, and replace at least 1x per year, or
more often if the filter is visibly full. Also clean the filter before
you store it for longer periods of time, or when you use it again
after a long time.
1. Turn off the device and pull the plug from the socket.
2. Remove the filter from the back of the device
(see figure 8).
3. Rinse the filter with lukewarm water, or have
it soak in soapy water.
4. Let the filter dry properly.
5. Put the cleaned (or new) filter back in the device.
ATTENTION:
•
If the filter has not dried properly, water can enter the
device. This could cause (electrical) damage.
47
EN
7
8