Bestron SUMMER BREEZE AAC9000 Mode D'emploi page 45

USAGE - Turning on and off
1. Put the plug in the socket. The devices peeps, which is normal. The display (figure 1, A) indicated the
current room temperature.
2. Push the button "power" (I). The device starts functioning in the last used mode. When you turn the
device on for the first time, it is in the cooling mode. The indication light above the button "mode" lights
up.
3. Set the desired direction of the air stream. Aim the air stream right ahead, or slightly downward by
manually setting the horizontal slats (4) in desired position. You can easily turn of move the device with
the sturdy castor wheels to direct the airstream into the room.
4. Push the button "power" again to turn the device off.
5. After use, pull the plug from the socket.
USAGE - Setting the mode
The device has three operating modes, with which you can ventilate, dehumidify, and cool the room.
Ventilating
1. Press the button "mode" (figure 1, G), until the indication light lights up at "fan". The device is now
functioning as a ventilator.
2. Press the button "speed" (D) to change between low or high speed exhaust air. The indication light lights
up at "low" (low speed) or "high" (high speed).
3. Press the "swing" button to activate the swing position. This leaves the air flow from the leftmove to the right.
Dehumidifying
1. Press the button "mode" (figure 1, G) once or multiple times, until the indication light lights up at "dehum".
The device switches to the lowest speed, and will now dehumidify the air.
Cooling
1. Press the button "mode" (figure 1, G) once or multiple times, until the indication light lights up at "cool".
The device is now functioning as an air cooler, and will cool the air by means of a cooling element.
2. Use the buttons "up" (E) and "down" (F) to set the cooling temperature between 16°C and 31°C.
3. Press the button "speed" (D) to switch between a low or high speed of exhaust air. The indication light
lights up at "low" (low speed) and "high" (high speed).
4. Press the "swing" button to activate the swing position. This leaves the air flow from the left move to the right.
ATTENTION:
• When the internal water collection tray is full, the device stops functioning, and the indication light lights
up on the control panel at "water full". You have to empty the water collection tray before you can
continue using the device (see 'CLEANING AND MAINTENANCE – Water drainage').
• If you often use the device to dehumidify the air, you can also use the continuous drainage (see
'CLEANING AND MAINTENANCE – Water drainage').
USAGE - Sleep function
The device has a sleep function. If you turn on this function, the device will operate in its most silent and
energy saving mode.
ATTENTION:
The sleep function only works in the "cool" mode.
1. Press the button "sleep" (figure 1, H) to turn on the sleep function. The device switches to the lowest
and most energy saving mode.
2. Press the button "sleep" again to turn off the sleep function.
ATTENTION:
After turning off the sleep fuction the device remains in the "cool" mode.
45
EN