Siemens PA0840M Mode D'emploi page 42

Use the "+" and "–" keys to select the
"Stop" function
Use the "down" key (see "up" and "down"
keys) to lower the cursor to the stop time
menu. Then use the "+" and "–" keys to
modify the stop time until the desired time is
reached.
The time changes 15 minutes at a time.
Press the "Timer" key
seconds without touching any keys to
memorise the set stop time.
The set time is displayed on the screen.
10 sec/
Instructions for Use
, (see "+" and "–" keys).
, or wait for 10
Turning the timer off
Press the "Timer" key
cursor on the timer menu. The last function
programmed appears by default.
Use the "+" and "–" keys to select the "Off"
function.
Press the "Timer" key
seconds without touching any keys to turn
the timer off. No set time is displayed on the
screen.
10 sec/
The times and functions set on the timer
remain active and the programmed
operation is repeated every day at the set
times until deactivated or cancelled as
described above.
42
, to position the
, or wait for 10