Elipson Prestige Facet PF 24F Mode D'emploi page 21

2a 2b
2a. Sticking the rubber pads (PF8B, PF14C, PFSUB8, PFSUB10)
We recommend that you stick the rubber pads, provided with the removable base, on the
loudspeakers. If you use the loudspeakers without the removable base, you should place
the rubber pads on the provided inserts, to avoid any damage.
As a rule, you can stick the rubber pads under the loudspeakers or under its base in order
to protect the loudspeaker itself and its base.
2b. Putting spikes (PF14F, PF24F, PF34F)
After mounting the base of the speaker, screw the spikes on it (no required tools).
Note: The presence of pads or decoupling spikes prevents vibrations to be transmitted to
the floor.
3a. Mounting the wall speakers (PF7SR, PF14LCR)
Make sure the brackets have been securely fastened flat against the wall (pay attention
to hollow wall anchors) and that the wall is able to bear the weight of the loudspeakers.
3b. Positioning the PF14LCR speaker with a permanent screen or TV screen
Place the speakers as close as possible to the screen. The mounting brackets allow you to install
the speaker horizontally or vertically.
21