Milwaukee M18 FUEL 3015-20 Manuel De L'utilisateur page 5

• Some dust created by power sanding,
WARNING
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
filter out microscopic particles.
READ AND SAVE ALL
INSTRUCTIONS FOR
FUTURE USE
SPECIFICATIONS
Cat. No. ..................................................... 3015-20
Volts.............................................................. 18 DC
Battery Type .................................................M18™
Charger Type................................................M18™
Recommended Ambient
Operating Temperature ......................0°F to 125°F
Brush Cutter Blade ............................. 49-16-2757
RPM ....................... Low 0 - 4900
Cutting Blade Diameter .................................... 9"
String Trimmer Head .......................... 49-16-2748
Cutting Diameter.....................................14" - 16"
RPM ....................... Low 0 - 4900
Cutting Line:
Cat. No. 49-16-2712 ............. 25' x 0.080" spiral
Cat. No. 49-16-2713 ............. 20' x 0.095" spiral
High 0 - 6200
High 0 - 6200
15m (50FT)
C
5
SYMBOLOGY
Volts
Direct Current
No Load Revolutions per Minute (RPM)
Safety Alert Symbol
Read operator's manual
Always wear eye, ear, and head
protection and use proper personal
protective equipment.
Wear slip-resistant footwear
Wear hand protection
Keep hands and feet
DANGER
away from blade
Beware of blade thrust
Beware of thrown objects
The distance between the machine
and bystanders shall be at least
15 m (50 ft).
Do not use saw blades, edger blades
or shredder blades.
Do not expose to rain.
Surface is hot. Avoid
CAUTION
contact.
US UL Listing for Canada and U.S.