Publicité
Les langues disponibles
Les langues disponibles
Public level and sensor level setting.
1 - Select page 2 using of
2 - Select the parameter to modify
3 - Enter using of numerical keyboard public level value and the sensor level value (number without comma).
4 -
Note : if the key has
5 -
Setting the levels associated to the threshold for regulation in global level.
1 - Select page 2 using of
2 - Select
3 - Set Leq day1 in maximum level allowed by structure.
4 - Do the same thing
5 -
ESCAPE
Day / Night switching time setting.
1 - Select page 2 using of
2 - Select the parameter to modify
3 - Enter using of numerical keyboard
4 -
Line setting.
(For SNA configurated in line mode)
1 - Select page 4 using of
2 - Select
On screen, a message displays " Max amplis an validate!!".
3 - Turn maximum sound of amplifiers.
Applicate a pink noise in display input, then regulate the sound in order to get 0dB on Vumeter (analog display),
or -6 dBFs (numerical display).
4 - Start the procedure using of
The setting procedure is activated. Wait until the message "Executed line setting" displays in screen.
Remark : if necessary conditions to carry out the automatic line calibration are not satisfied, the procedure is drop
"Att. Max = 32 dB
5 -
ESCAPE
AMIX
ANNEX 2: SETTING MODES RECAP (next)
PAGE
2
ENTER
to save the new value or
been pressed, you must take again editing at stage 2 and start again operation.
ESCAPE
then
ESCAPE
ESCAPE
PAGE
2
1
( "Leq day1" function) .
2
3
,
then
ESCAPE
(For SNA configurated in sensor mode)
PAGE
2
ENTER
to validate, then
PAGE
4
6
( "line setting" function) .
out and the message following displays:
DROP OUT SETTING !!".
then
ESCAPE
6
7
or
.
to cancel.
ESCAPE
to leave page 2.
4
and
( Leq day 2, Leq night 1 and 2).
to leave page 2.
8
9
or
.
Day / Night switching time.
ESCAPE
ESCAPE
and again
ENTER
to leave page 4.
42
6 Public Level
7 Sensor level
1 Leq day 1
2 Leq day 2 (Day Window)
3 Leq night 1
4 Leq night 2 (Night Window)
8 Hour day to night
9 Hour night to day
to leave page 2.
SNA 50-2
Publicité
