Publicité
Les langues disponibles
Les langues disponibles
US
9. Connect to a suitable connector and pull to ensure the tether is secure.
If using a Tool Tether Detachable Loop, connect the hook end of the side release buckle to
the insertion end of the buckle on a Tool Tether Carabiner Detachable Loop.
10
All manuals and user guides at all-guidesbox.com
MSA Tool Tethers with Carabiners
5. Place the tether along the handle of
the tool, making sure the web end is
facing up.
6. Place the tape on top of the tether just
below the web end and tightly wrap
once around the tool to secure the
tether.
7. Continue wrapping by pulling and
stretching the tape tightly around the
tool, overlapping each time by at least
half an inch.
8. Firmly press the end of the tape to the
wrapped tether to seal.
Publicité
