Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
1. Place top (A) upside down on a soft surface,
such as carpet. Attach legs (C) to top (A) using
bolts (AA) and washers (BB). Hand tighten only.
Hardware Used
Bolt
AA
Washer
BB
2. Attach panels (B) to legs (C) using bolts (AA)
and washers (BB).
Check alignment of all hardware and make any
necessary corrections. Then, securely tighten all
bolts with open wrench (DD). Cover all bolts with
bolt covers (CC).
Hardware Used
Bolt
AA
Washer
BB
CC
Bolt Cover
DD
Open Wrench
CARE AND MAINTENANCE
• Clean frame with a solution of warm water and mild soap. Dry completely. Do not use bleach
or solvents. Use a fine automotive wax to maintain gloss on non-textured finishes.
• Severe stains may require light sanding and touch-up painting.
• When using touch-up paint, if covering scratches, rub lightly with fine steel wool to smooth the
surface and improve paint adhesion. Apply thin coats of touch-up paint and allow ample drying
time between coats.
• The finish on furniture is formulated and baked on to make it highly resistant to repellents and
lotions. However, to avoid discoloration, clean the frame as soon as possible after exposure.
1
AA
BB
x 4
x 4
2
x 16
x 16
x 20
x 2
3
Lowes.com/allenandroth
C
A
C
B
AA
BB
CC
Publicité
