Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
2. Connect the left decorative groove (C1) and the right
decorative groove (C2) to a decorative groove connector (F)
using four M6 x 15 mm bolts (AA) and M6 flat washers (BB).
Tighten with Phillips screwdriver.
Repeat this step for the 3 remaining left decorative grooves
(C1), right decorative grooves (C2) and decorative groove
connectors (F).
Hardware Used
M6 x 15 mm Bolt
AA
M6 Flat Washer
BB
3. Insert 7 plastic hooks (V) inside each left mosquito netting
tube (J1) and 7 plastic hooks (V) inside each right mosquito
netting tube (J2).
4. Attach the right mosquito netting tubes (J2) to the right
decorative groove (C2) using 6 M6 x 15 mm bolts (AA)
and M6 flat washers (BB) for each. Tighten with Phillips
screwdriver.
Repeat this step for the left mosquito netting tubes (J1)
and left decorative grooves (C1).
Hardware Used
M6 x 15 mm Bolt
AA
M6 Flat Washer
BB
x 16
x 16
x 48
x 48
8
2
C2
BB
AA
BB
AA
3
J1
V
Lowes.com/allenandroth
F
C1
Publicité
