Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
12. Connect small top tubes (N1) with small top tube
connectors (N2) using M6 x 15 mm bolts (AA) and M6
flat washers (BB). Tighten with Phillips screwdriver.
Hardware Used
M6 x 15 mm Bolt
AA
M6 Flat Washer
BB
13. Attach the top of the oblique beams (D) to small top
tube connectors (N2) using M6 x 15 mm bolts (AA) and
M6 flat washers (BB).Tighten with Phillips screwdriver.
Hardware Used
M6 x 15 mm Bolt
AA
M6 Flat Washer
BB
14. Attach post connectors (R) to the top of each post (A).
Then, with the assistance of another person, lift the assembly
from step 13 and insert an M6 x 20 mm bolt (II) through
a M6 flat washer (BB), then through the bottom of oblique
beam (D), post (A) and post connector (R). Tighten with
Phillips screwdriver.
Repeat for each corner.
Hardware Used
M6 x 20 mm Bolt
II
M6 Flat Washer
BB
12
x 8
x 8
13
x 8
x 8
14
x 4
x 4
12
N1
BB
AA
BB
AA
D
D
BB
II
A
Lowes.com/allenandroth
N2
N2
BB
AA
R
Publicité
