Publicité
Les langues disponibles
Les langues disponibles
12
12B
12A
12 FLUSHING
NOTE: Pressure must be approximately equal on both Hot and Cold sides for valve
to function properly.
Open both Hot and Cold water valves allowing water to flow from Tub Outlet (12A)and
Shower Outlet (12B) until all foreign matter has cleared the lines. Check all connections
for leaks.
13
13C
13A
13 SHOWER HEAD INSTALLATION
Thread Shower Head (13A) onto Shower Arm (13B). placing the Washer (13C) in between.
13B
ENGLISH
14
14A
14C
14B
14A
14A
14 VALVE REMOVAL
Turn off water supplies and relieve pressure before working on your faucet! Be
sure Stems (14A) are in the full OPEN position. Remove Trim (see steps 10 & 11), remove
Valve (14B) and Washer (14C) as shown. Replace parts as necessary.
Inspect and clean the mounting surface thoroughly before replacing.
15
15A
15 SEAT REMOVAL & INSTALLATION
5
Using a
/
" Square Wrench (15A), remove Internal Seats (15B) from Valve Body (15C)
16
as shown. Replace by reversing steps.
CAUTION: Maintenance
DISASSEMBLY
1.
Replacement parts may be available at the store where you purchased your faucet.
2.
When replacement parts are not available, please write or call Price Pfister Consumer
Service.
Always turn off water and relieve pressure before working on your faucet.
3.
NOTE: Trim Care
Cleaning Instructions:
For all Handles and decorative finishes, use only a soft damp cloth to clean and shine.
Use of polish, detergents, abrasive cleaners, organic solvents or acid may cause damage.
Use of other than a soft damp cloth will nullify our warranty!
Special Trim:
Trim products which contain Porcelain or other similar substance are not acceptable for
public areas or Commercial use. Installation of Said Trim is at Users Risk!
1–800–PFAUCET (1–800–732–8238)
For Toll-Free Pfaucet information call 1–800–PFAUCET
(1–800–732–8238) or visit www.pricepfister.com
• Installation Support
• Care and Warranty Information
5
14C
14B
15B
15C
Publicité
