Samsung PS51D8000 Manuel D'utilisation page 13

You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or
wireless connection.
Network Connection - Wireless
You can connect your TV to your LAN through a standard wireless router or modem.
The LAN Port on
the Wall
Samsung's Wireless LAN adapter supports the IEEE 802.11a/b/g and n communication protocols. Samsung
recommends using IEEE 802.11n. When you play the video over a IEEE 802.11b/g connection, the video may
not play smoothly.
Most wireless network systems incorporate a security system that requires devices that access the network
through an access point or wireless router (typically a wireless IP Sharer) to transmit an encrypted security code
called an access key.
If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or
TKIP AES (WPS2Mixed) for your wireless router, Samsung TVs will not support a connection in compliance with
new Wi-Fi certification specifications.
Network Connection - Wired
There are two main ways to connect your TV to your network using cable, depending on your network setup.
They are illustrated below:
The Modem Port on the Wall
The LAN Port on the Wall
✎
It is not supported when the network speed is under 10 Mbps.
✎
Use Cat 5 cable for the connection.
Network Connection
Wireless IP sharer
(Router having DHCP server)
LAN Cable
External Modem
(ADSL / VDSL / Cable TV)
Modem Cable
LAN Cable
English - 13
TV
TV Rear Panel
LAN Cable
TV Rear Panel