Costway MU10090 Instructions D'installation page 7

CHORD
1. Long press the encoder switch and rotate the encoder to select
CHORD.
2. Press the switch gently and rotate the encoder from left to right to select
SINGLE, FINGERS and OFF.
During the playing of rhythm, the system enters the chord mode. Chord
function: Press the key in the area A1~F4# to play the chords that match
the rhythm, and the tone of the chords changes with the pitch of the harp.
LEARN
1. Long press the encoder switch and rotate the encoder to choose
LEARN.
2. Gently press the switch, then rotate the encoder left and right to choose
the teaching mode (teaching A, teaching B, and OFF).
Teaching A: Select different demo music and short press the Demo button
to enter the teaching mode. Playing any key can play the main melody of
the demo song, The keyboard lights turn on and off with the main melody.
Teaching B: Select different demo music and short press the Demo button
to enter the teaching mode. The keyboard will light with the main melody,
the user press the right keys, light the next note of the lamp;
If the user does not press the right keys, they pause until they press the
right keys to light the next note.
SUSTAIN
1. Long press the encoder switch and rotate the encoder to choose
SUSTAIN.
2. Gently press the switch, then rotate the encoder left and right to choose
whether the sustain is on or off.
Turn on the sustain function, and make the tone produce the effect of
continuance in performance.
12
VIBRATO
1. Long press the encoder switch and rotate the encoder to select
VIBRATO
2. Gently press the switch, then rotate the encoder left and right to choose
whether the vibrato is on or off.
Turn on the vibrato function to produce the tremolo effect in the
performance.
DRUM KIT
1. Long press the encoder switch and rotate the encoder to select DRUM
KIT
2. Gently press the switch, then rotate the encoder left and right to choose
whether the drum kit is on or off.
When the drum kit is on, all the keys are turned on to become the
percussion tone, and when the drum kit is off, the percussion tone is turned
off.
VELOCITY
1. Long press the encoder switch and rotate the encoder to select
VELOCITY.
2. Gently press the switch, then rotate the encoder left and right to choose
whether the velocity is on or off.
When the velocity is on, press the key with greater force and the sound will
be louder.
The default strength is on.
Sleep Switch:
Long press the encoder switch, rotate the encoder to choose the sleep
switch.
The default mode is sleep mode on. In the default mode, when the piano is
not played after 10 minutes, the electric piano will be turned off.
If you are in sleep mode off, it will always be on.
13