Smeg KLF03 Manuel D'utilisation page 11

4.4 What to do if...
Problem
Pouring water becomes
more difficult
The kettle turns off before
boiling
The appliance does not
turn on
12 12
Cleaning and maintenance
Cause
Scale build-up on filter
The base of the kettle has
excessive scale build-up
There is too little water in
the kettle
The safety device has
tripped out due to the kettle
being operated without
water
The plug is not properly
inserted in the power
socket
The cable is defective
Lack of power
Solution
Check that the filter is clean
and correctly positioned
Descale more frequently
Increase the quantity of water
until you reach at least the
minimum level
Let the kettle cool down before
attempting to boil water again
Insert the plug into the power
socket. Do not use adaptors
or extensions.
Make sure that the main circuit
breaker is on
Have the cable replaced at
an Authorised Service Centre
Make sure that the main circuit
breaker is on