CEBEK T-5 Guide Rapide

Interface of four two isolated from the input with optocouplers. When applying a signal between 3 and 24 V. DC to any
input, the corresponding relay output will be activated.
Allows Control by TTL or Cmos signals.
It incorporates protection against polarity inversion, work indicator leds and connection terminals.
POWER SUPPLY : 12 VDC. We recommend that you use our Cebek FE-103/FE-2 power supplies.
Install a fuse and switch. Both are essential for the protection of the module and for your own safety, according to the
CE standard.
Respect the negative and positive connections in the power supply and the signal inputs.
OPERATION : It has two inputs, each of them independent with respect to the others and with their corresponding
outputs. On each of these inputs, by applying a signal, the corresponding output will be activated, connecting to the
relay, and will continue in that state as long as said signal remains applied to the input. The voltage applicable to the
inputs may be different from each other, but may never be less than 3 V or more than 24 VDC.
INSTALLATION : Make the wiring connection of your control signals to the inputs. Note the identification of the
polarity of these. The wiring must be as short as possible, you must use shielded cable.
Interface de deux sorties isolées de l'entrée avec des optocoupleurs. Lors de l'application d'un signal entre 3 et 24 V.
DC à n'importe quelle entrée, la sortie de relais correspondante sera activée.
Permet le contrôle par signaux TTL ou Cmos.
Il intègre une protection contre l'inversion de polarité, des leds d'indication de travail et des bornes de connexion.
2 Outputs by relay interface
2 Interface de sortie optocoupleur relais
Interface 2 salidas optocopladas a relé
Interface 2 sortides optocoblades a relé
www.cebek.com -
T-5
Technical characteristics
Voltage : 12 V. DC
Low energy : 0.2 mA.
Maximum consumption : 100 mA.
Current Min. Entry : 10 mA
Low voltage. Input : 3 V. DC
Max. Input. : 24 V. DC
Max. Relay output : 7A ( 2A for inductive loads)
Reverse polarity protection : Yes.
Sizes : 72 x 64 x 20
Weight : 45 gr
Din rail : C-7564
sat@fadisel.com