INSTALLING A THE STYLUS (NEEDLE)
NOTE: Do not directly touch the STYLUS (NEEDLE) (15) during
installation, or you may cause permanent damage to the STYLUS (15).
1. Hold the front tip of the Stylus Assembly with your thumb and index
fingers and insert the rear edge of the Stylus Assembly on the
CARTRIDGE (14) as shown in Fig 5a.
2. While applying gentle pressure on the top of the TONEARM (2) with
your index finger, carefully push the Stylus Assembly upwards until
you hear a click and the Stylus Assembly locks into place (Fig 6a).
3. The new STYLUS (15) is now ready to use.
• Under normal use a STYLUS (15) should last for about 50-60 hours
of record play.
5A
10
Soho_user_Manual EU - MAY 2017.indd 10
6A
7A
23/07/2017 23:38