H.Koenig KMC90 Manuel D'utilisation page 7

1. Start the appliance. The screen will shown the following
sound.
2. Press the temperature selection button
Select the desired temperature by turning the temperature selection button
temperature will rise 1° at a time. When you're done press the temperature button to confirm
(To use the bowl select a temperature between 25°C and 140°C).
3. Set the timer as explained above
4. Choose the desired speed
stopped at any time by setting the speed to "OFF". This will also stop the heating. The mixer
will start heating again when you set another speed.
5. If the bowl temperature exceeds 60°C and the selected speed is high, the speed will lower
for security reasons. Once the temperature is below 60°C, you will need to set the speed to
"OFF" and choose a new one.
P
The pulse button
To use the pulse function, you need to press the pulse button. The mixer will function at
maximum speed as long as you keep the button pressed. If the bowl heats over 60°C, the
speed will automatically lower itself down.
HOW TO USE THE ACCESSORIES (kneading hook, flat whisk, whisk,
1.
. The mixer will start to heat. The mixer function can be
THE PULSE BUTTON
can only be used when the speed is set up to "OFF".
flexible whisk for high temperatures)
and you will hear a short
. The screen shown the following
1. Place the appliance on a flat and stable
surface such as a kitchen counter.
2. Ensure the lids are properly in place..
.
the