UFESA SC8310 Mode D'emploi page 14

IMPORTANT WARNINGS
This appliance is designed for home use and should never be used for commercial
or industrial use under any circumstances. Prior to plugging in the product, check that
your mains voltage is the same as the one indicated on the product label. The mains
connection cable must not be tangled or wrapped around the product during use. Do
not pull on the connection cord in order to unplug it. Proceed according to the conser-
vation and cleaning section of this manual for cleaning.
Do not use the product to warm up animals. Unplug the product imme- diately from
the mains in the event of any breakdown or damage and contact an authorised Te-
chnical support service.
In order to prevent any risk of danger, do not open the device. Only qualified technical
personnel from the brand´s Official Technical support service may carry out repairs
or procedures on the device.
Any incorrect use or improper handling of the product shall render the warranty null
and void. Only an authorised technical support service centre may carry out repairs
on this product.
B&B TRENDS S.L. disclaims all liability for damages that may occur to people,
animals or objects, for the non-observance of these warnings.
INSTRUCTIONS FOR USE
To turn the product, select the temperature/ speed selector (E).
Press the cold air button (D) in order to set your hair style and achieve a perfect
finish.
The ion generator is automatically activated when turned on, and removes the
charging of negative ions, leaving you with perfect and less frizzy hair.
The air filter (C) can be cleaned by pressing the index finger and thumb in
anticlockwise direction and pulling outwards, thus prolonging the life of your hair
dryer.
ACCESSORIES
Special diffuser (B) for curly hair, applying slight pressure to attach the same.
Concentrator (A) to ensure perfect straightening. Position it by lining up the
concentrator tabs with the openings located in the inside of the dryer nozzle and
turn it slightly it in a clockwise direction. Remove it by turning it slightly in an anti-
clockwise direction.
Select the speed selector (F) and leave it in the 0 position in order to turn off the
device, prior to unplugging it from the mains.
14