Scorpa 125 SC Racing 2023 Manuel D'instructions page 71

MAINTENANCE PROCESSES
Position of front brake lever
To properly press on the handle while braking, the
position must be adapted to the driver.
To change the position:
- Loosen screw
fluid tank.
- Sit on the saddle.
A
- Place feet on the footrests.
- Place your hand on the handle and set it to your
convenience.
- Set the position of screw
B
To change the distance between the handle and
the grip:
- Loosen locknut
- Screw or unscrew threaded screw
C
Turn right to DECREASE THE DISTANCE.
Turn left to INCREASE THE DISTANCE.
WARNING
After changing position, check and adjust clearance of the front
brake.
WARNING
Your hand should be relaxed, and it should be easy to press on
the handle.
from the handle and brake
A
to halfway.
A
.
B
.
C
71