Classic Accessories Le Cimarron Manuel De L'utilisateur page 12

C I M A R R O N P O N T O O N B O A T O W N E R ' S M A N U A L
7. Insert the foot pegs.
Locate the front of the pontoon frames, (the end
closest to the oar lock). Insert the foot pegs into
the pontoon frame and attach with short clevis
pins. Choose a position in the middle of the
adjustment range.
8. Attach the cargo deck.
The cargo deck comes partially assembled to
the rear of the deck frame. Start by inserting
the front of the cargo deck frame into pontoon
frames. Insert a short clevis frame pin on either
side of the frame from the top down into the
holes where the cargo deck frame slides into the
pontoon frames.
Now attach webbing straps over the frame,
through the square ring and secure with the
hook and loop straps. Some adjustment may be
necessary to center the fabric deck on the frame.
9. Secure the seat back into place.
Slide the seat stubs onto each end of the
seat back frame. Next, slide the seat back
panel onto the seat back frame. Then place
the assembled seat back into position on the
outsides of the seat frame and secure to the seat
base with the two long clevis frame pins.
12
Rear view of
seat back assembly