Cleaning the blender
o After each use clean the blending container with its base with a mild cleaning agent,
then rinse it thoroughly with clean water and drain.
o Clean the blades in the blending container with a kitchen brush.
WARNING! Hazard of injury!
The edges of the blades are very sharp, it is necessary to be particularly careful
while cleaning them!
o Only use a soft cloth and make sure you never use any kind of abrasive agents or
pads which could scratch the surface.
o After the cleaning procedure, you should use a soft and dry cloth to wipe dry and
polish the surface.
o Make sure the device has been cleaned properly before storing it in a dry place.
6.3 Safety instructions for maintenance
o Inspect the power cable regularly for damage. Never use the device if the cable is
damaged. If the power cable is damaged, have an authorised service center or
qualified electrician replace it.
o In case of damage or malfunction, please contact your stockist or our customer
service centre.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.
- 31 -