Bartscher Combi Juicer 150139 Mode D'emploi page 31

•
Put the cover on the blending container before starting the device. Close the blender
container lid (13) with the use of the inner lid (12).
CAUTION!
Before starting the device, always make sure that the inner lid (12) is put in the
blender container lid (13).
•
Connect the device to a single grounded socket.
•
During the start of the device, hold firmly the handle of the blending container.
•
Start the pulsatory work button (9) 3-5 times.
•
Choose one of the speed levels („1" or „2") with the use of the lever switch (8).
•
In the case of the blender, using the „1" speed is recommended.
•
The use of the pulsatory work function is recommended for grinding ice.
•
In order to switch off the device, use the „
•
Do not let the device operate too long at once. The device processes the filled in
foods very quickly. Check the consistency of the filled ingredients after a few seconds
and, if required, switch on the device once more.
•
Do not overstress the device by filling in too many frozen or too concrete ingredients
into the glass container. When the motor starts spluttering, switch off the device
immediately, pull the power plug and remove a few ingredients from the glass
container.
WARNING! Hazard of injury!
During the work of the device never reach inside the blending container!
During the work of the device never use other objects to press the products in the
blending container either because they may get dragged in by the blades (15),
which may cause bodily injury to the person operating the device or a damage to
the device!
•
Do not take off the lid of the blending container before the engine completely stops
working.
CAUTION!
The device has got a protection function. The engine of the device switches off
until the blending container has been installed.
" position next to the lever switch (8).
- 29 -