Back to Basics SLUSHIE EXPRESS SITSELP Mode D'emploi page 5

Caution: Follow these important steps to assemble, tighten and mount slushie cup
quickly and correctly. Injury may result if moving blades are accidentally exposed.
Unplug appliance from electrical outlet before assembling, removing, or cleaning.
Never place motor or cord in water or other liquids.
16 oz. Slushie Cup
Gasket
Blade Base
Motor Base
Before using the first time, be sure to thoroughly wash the blade base, slushie cup,
lid and spoon/straw in warm, soapy water. Rinse and dry thoroughly. Do not wash
any parts in dishwasher.
The Slushie Cup has convenient measuring marks to create perfect slushies and
frozen drinks. To make your favorite slushie, follow the steps below.
1. Add ingredients to the Slushie Cup using the markings on the back of the cup as
a measuring guide:
a. Add Back To Basics
to the "Syrup" line.
b. Add water up to the "Liquid" line.
c. Add ice until the liquid mixture reaches the "Ice" line. Gently press
ice down to make liquid rise to "Ice" line if necessary. Do not add
too much ice.
2. Place the Blade Base on the Slushie Cup and turn clockwise until tight. If lid will
not go on properly due to too much ice, remove some ice before proceeding.
3. Flip the Slushie Cup with Blade Base attached over (cup will be upside down).
Position the Blade Base onto the Motor Base by aligning the small tabs on the
Blade Base with the matching openings on the Motor Base top.
All manuals and user guides at all-guides.com
U Y S
SING OUR LUSHIE
®
Slushie/Snow Cone concentrated syrup up
5
™
E
XPRESS
Slushie Cup Lid
Slushie
Spoon/Straw