exodraft EFC18 Mode D'emploi page 4

4 • UK
If an FRx-AFD flange is used: Remove the plug
from the pipe, and insert the sensor. Tighten
the screw (A).
1.2 Installation instructions
Connect the EFC18 and the temperature sensor as in the diagram below (RS/RSV).
Connect the EFC18 and the temperature sensor as in the diagram below (RSHT).
All manuals and user guides at all-guides.com
(A)
3001937-EFC18-DK-DE-NO-SE-UK-NL-FR
If an FRx-AFD flange is used: Remove the plug
from the pipe, and insert the sensor. Tighten
the screw (A).
(A)