Bontempi Toy Band Star Manuel D'instructions page 5

MAINS SUPPLY
The instrument can be supplied by the AC/DC
(Vdc =6V / I = 300 mA)
tral adapter (not supplied) conforms to national
and international safety regulations covering
electrical appliances. Insert the jack in the DC 6V
r
socket .
• The toy is not intended for children under 3 years old
• The toy must only be used with the recommended
adaptor • The toy is to be disconnected from the
adaptor before cleaning • The mains adaptor is NOT a
toy.
BATTERY SUPPLY
Open the battery compartment. Insert
batteries R6/AA
(not included). Re-fit battery
cover.
Replace batteries when the quality of sound
becomes bad. Use alkaline batteries to obtain a
longer duration.
ATTENTION – BATTERY CARE
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries must be removed from the
toy before being charged. • Rechargeable batteries
are only to be charged under adult supervision. •
Different types of batteries or new and old batteries are
not to be mixed. • Use only batteries of the same or
equivalent type. • Batteries are to be inserted with cor-
rect polarity. • Remove exhausted batteries to prevent
leakage. • Do not short-circuit supply terminals. •
Remove batteries during long periods of non-use.
All manuals and user guides at all-guides.com
WASTE DISPOSAL STANDARDS
For information regarding the disposal of the items
mentioned here below, please refer to Council
positive cen-
Administration office regarding specialised waste col-
lection centres.
1. DISPOSAL OF BATTERIES:
Protect the environment by disposing
of batteries in the special containers
provided for this use.
2. PACKAGING DISPOSAL:
Take the paper, cardboard and corrugated board to
the appropriate waste collection centres. Plastic mate-
rial must be placed in the relevant collection contai-
ners.
The symbols indicating the various types of plastic are:
Key for the different types of plastic materials:
PET = Polyethylene terephtalate • PE = Polyethylene,
code 02 for PE-HD, 04 for PE-LD • PVC =Polyvinyl chlori-
de • PP = Polypropylene • PS = Polystyrene, Polystyrene
foam • O = Other polymers (ABS, Laminates, etc.)
4 x 1,5V
3. DISPOSING OF ELECTRICAL APPLIANCES
The wheelie bin symbol with a cross indica-
tes that the product must not be disposed
of in the domestic waste at the end of its
useful life. Instead, it should be taken to
your nearest designated collection point or
recycling facility. Alternatively, check with your retailer
and return the product when buying a replacement,
on a one-to-one basis or as free of charge in case the
size is smaller than 25 cm. Appropriate disposal promo-
tes the recycling of parts and materials, as well as hel-
ping to protect the environment and human health.
Under current legislation, strict penalties are enforced
against those disposing of products illegally. For more
R6/AA 1.5V R6/AA 1.5V
information about the collection of special waste, con-
R6/AA 1.5V R6/AA 1.5V
tact your Local Authority.
R6/AA 1.5V R6/AA 1.5V
R6/AA 1.5V R6/AA 1.5V
SWITCHING ON/OFF
To switch on the instrument move selector
ON
DEMOSONGS
This keyboard has
pre-recorded tracks, press the
succession.
01 02 03
PET PE PVC
. To switch off move the same selector to
22 demosongs
05 06 07
PP PS O
a
to
OFF
. To choose the
k
DEMO
key in
5
.