Hama RC300 Mode D'emploi page 5

g Operating Instruction
Indicator Standing for
Radio signal
D Date
Foreign time indication
PM PM (12 HR display
only)
AM AM (12 HR display
only)
Alarm 1
• After the battery is installed, the LCD will turn on and beep
for 2 seconds. The clock will automatically search the
radio signal. It Takes about 3 - 5 minutes to fi nish this
process.
• If the radio signal is received, the date & time will be set
automatically with radio control signal Icon
8
00092631bda.indd 10-11 00092631bda.indd 10-11
All manuals and user guides at all-guides.com
Indicator Standing for
Radio signal weekly
Repeat alarm
indication
M Month
Summer time
indication
DUAL Dual Time
TIME
Alarm 2
turns on.
• If the clock fails to receive the time signal, it will be in
Time/Temperature display with the
Then User can Set the time manually.
• Radio-controlled signal will be scheduled to receive
every hour.
Selecting Alarm 1/Alarm 2/Dual time Display
Press MODE will display the ALARM 1 time.
Press MODE again will display the ALARM 2 time.
Press MODE again will display the Dual Time.
Manual Time Setting
The system date and time can be set by pressing WAVE for
3 seconds in Time display with the
Setting the Time
• Press WAVE: the hour digits are blinking and can
be set by pressing „-" or „+"key.
• Press MODE again: the minute digits are blinking
and can be set by pressing „-"or"+" key.
• Press MODE again: the year digits are blinking and
can be set by pressing „-"or"+" key.
• Press MODE again: the month digits are blinking
and can be set by pressing „-"or"+" key.
• Press MODE again: the date is blinking and can be
set by pressing „-"or"+" key.
• Press MODE one last time: the normal display appears.
icon Turns off.
Icon turn off.
9
18.06.2009 12:52:38 Uhr 18.06.2009 12:52:38 Uhr