Publicité
Before you light the heater, check the
following points:
The combustion cylinder must be proprely positioned. Make
it rotate pushing the lever from left to right and make sure it
is correctly fitted.
When you use the heater for the first time, odours may
persist for a certain time after lighting. This is normal, as oil
and protective grease in the heater have to be burnt off.
Slowly push the ignition lever downwards until the START
position for 1 or 2 seconds until the flame is visible. The
beep will sound and the heater ignites automatically.
Check visually through the glas burner cylinder that the
heater is alight. After having carried out the ignition
procedure, there may be some white smoke coming out of
the ignition zone, without the heater being lit. In this case,
move up the ignition lever part way through its travel and the
heater will start to operate. This operation must be done
slowly and gently.
Try several times if lighting is not carried out in the 1 or 2
seconds. In the event of insistence, you risk to roast the ligh-
ter or the wick (spare parts non garanted).
CAUTION: NEVER LIGHT YOUR HEATER WITH
MATCHES OR A LIGHTER OR OTHER FIRES
LIGHTING THE HEATER
64
Move from side to side
Publicité
