Honeywell Home TH6320ZW2003 Guide De L'utilisateur page 14

Schedule period
An active period is shown underlined on the
thermostat home screen. Periods shown varies
on whether thermostat is included in Z-Wave
network and whether local thermostat schedule
is enabled and turned On.
Thermostat INCLUDED in Z-Wave network:
1 Thermostat schedule is turned OFF: Away,
Home periods are displayed.
2 Thermostat schedule is turned ON: Away,
Home, Sleep periods are displayed.
Thermostat EXCLUDED from Z-Wave network:
1 Thermostat schedule is turned OFF:
Schedule periods are not displayed.
2 Thermostat schedule is turned ON: Wake,
Away, Home, Sleep periods are displayed.
Setting a schedule
To edit a schedule on the thermostat screen,
follow the steps below.
1 Touch Menu on the thermostat home screen.
2 Touch the
SCHEDULE, then touch Select.
3 Touch the
a day or set of days, then touch Select on the
period you want to edit.
4 Touch the time area, then touch
adjust when the period starts. Touch Select to
confirm.
5 Touch the temperature area, then touch
or to adjust your preferred temperature
for the mode that's currently active (either
heating or cooling). Touch Select to confirm.
Then touch
temperature for the inactive mode. Touch
Select to confirm.
6 Edit the next period or use the
see DONE, then press Select to save changes
and go to the home screen.
NOTE: Schedule menu is available only if
enabled in the thermostat Installer setup menu.
or arrows until you see
or arrows to select a period in
or to adjust your preferred
Following Schedule
Following Schedule
or to
until you
14
AM
Mode Fan
Heat Auto
Wake
Mode Menu Fan
AM
Mode Fan
Heat Auto
Home
Mode Menu Fan
Back Select
AM
HeatTo
Back Select
Back Select
AM
Following Schedule
Mode Fan
Heat Auto
Away
Mode Menu Fan
AM
Following Schedule
Mode Fan
Heat Auto
Sleep
Mode Menu Fan
Sched.
Back Select On/Off
AM
HeatTo
Back Select
Sched.
On/Off