BorMann Elite BFN6110 034766 Mode D'emploi page 4

EN
SAFETY PRECAUTIONS
1. Children must not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
2. Means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
3. Warning: If unusual oscillating motion is observed, stop using the ceiling fan immediately and contact an authorized service center or local sales representative.
4. Any replacement of parts of the ceiling fan suspension system may only be performed by authorised service agents or suitably qualified technicians.
5. The fixing means for attachment to the ceiling, such as hooks or other devices, must be fixed with sufficient strength to withstand 4 times the weight of the
ceiling fan.
6. The mounting of the suspension system and all electrical connections must be performed only by suitably qualified technicians.
7. The fan must be installed so that the blades are at least 2.7 metres above the floor.
8. All wiring must be in accordance with the National Electrical Code and local electrical standards. Electrical installation should be performed by a qualified
licensed electrician.
9. Do not use the rotation direction switch while the fan is in motion. The fan must switched off and the propeller must be completely stopped before changing
the direction of rotation.
10. Do not use water or detergents when cleaning the fan or fan blades. A dry or lightly dampened cloth will be suitable for most cleaning.
11. After all electrical connections are completed, the spliced conductors should be turned up and carefully pushed into the outlet box. The wires should be
separated and securely placed with the grounding conductor and the appliance grounding conductor on one side of the outlet box.
SPECIFICATIONS
Technical Data
Model BFN6110
Voltage, Frequency 220-240V, 50/60Hz
Power 70 W
Diameter 120 cm
4 MDF Blades, E27 Lamp holder, 2 Functions,
Includes
Remote control
ASSEMBLY
4
1. Fasten the suspension plate on the ceiling. (Make sure to use appriopriate fixing means like hooks or other
devices with a sufficient strength to withstand 4 times the weight of your ceiling fan.)
2. Pass the suspension rod through the suction cup and connect it to motor housing.
3. Hang the motor on the suspension rod for wiring.
4. Fasten all connections between motor and suspension plate.
WWW.NIKOLAOUTOOLS.GR
* The manufacturer reserves the right to make minor changes to product design and technical
specifications without prior notice unless these changes significantly affect the performance
and safety of the products. The parts described / illustrated in the pages of the manual that
you hold in your hands may also concern other models of the manufacturer's product line with
similar features and may not be included in the product you just acquired.
* To ensure the safety and reliability of the product and the warranty validity, all repair,
inspection, repair or replacement work, including maintenance and special adjustments, must
only be carried out by technicians of the authorized service department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with non-
provided equipment may cause malfunctions or even serious injury or death. The manufacturer
and the importer shall not be liable for injuries and damages resulting from the use of non-
conforming equipment.