Klarstein Oceana Mode D'emploi page 47

All manuals and user guides at all-guides.com
Drain water from the water tank
• In standby mode, press and hold the Program and Extra Drying buttons
simultaneously for 3 seconds to drain the water tank.
CLEANING AND CARE
Note: Never use the dishwasher without filters!
Make sure the filter is properly assembled. The performance may be affected and
dishes and utensils could become damaged.
Cleaning the filter system
The filter system removes dirt and food residues, allowing the clean water to be re-
circulated for cleaning. In order for the device to perform at its best you should clean the
filters once a week. We recommend removing coarse dirt and food residues after each
wash, by rinsing the filter and cup under running water. To remove the filter assembly,
pull the cup handle in the upward direction.
Fine filter:
Filters out dirt and residues and
prevents them from getting back
onto the dishes during the washing
process.
Main filter:
Leftovers and dirt particles are
crushed by a special nozzle on the
spray arm and discharged through
the drain.
Step 1:
Unscrew the complete filter set
counterclockwise.
Step 2:
Lift fine filter (B) up from main filter
(A). When you have cleaned the
filters, replace them in reverse order.
EN
47