Sunred TSL15 Manuel De L'utilisateur page 8

All manuals and user guides at all-guides.com
3. Turn the switch to "III", it means the heater is working and on the maximum heating position (2000W).
4. Turn the switch to "OFF", the heater is in off mode.
Socket operation

Open the cover of the socket, and connect the plug of appliance which you want to charge.
！！！Attention: An appliance which is connected to the socket of the heater, is not
greater than 1000W !
When both sockets are connected, the total power of two appliances is not greater
than 1000W!
 Always disconnect the power cable from the electrical supply, when the heater is not in use.
www.sunred.nl