Samsung LE40M9 Instructions D'utilisation page 22

Resetting the Sound Settings to the Factory Defaults
Connecting Headphones
Selecting the Sound Mode
You can also set these options
simply by pressing the DUAL
button on remote control.
Setting and Displaying the Current Time
If Game Mode is On, the Reset Sound function is activated. Selecting the Reset
function after setting the equalizer resets the equalizer setting to the factory
defaults.
1. Press the MENU button to display the menu. Press the
select "Sound", then press the ENTER/OK button.
2. Press the or button to select "Reset", then press the ENTER/OK button.
3. Press the EXIT button to exit.
You can select this option when the "Game Mode" is set to "On".
You can connect a set of headphones to your set if you wish to watch a
TV programme without disturbing the other people in the room.
When you insert the head set jack into the corresponding port,
you can operate only "Internal Mute" and "Sound Select" (in PIP mode) in Sound menu.
(Refer to "Selecting the Internal Mute" on page 19)
Prolonged use of headphones at a high volume may damage your hearing.
You will not receive sound from the speakers when you connect headphones to the system.
You can set the sound mode by pressing the "DUAL" button.
When you press it, the current sound mode is displayed on the screen.
FM
Stereo
NICAM
Stereo
You can set the TV's clock so that the current time is displayed when you press
the INFO button. You must also set the time if you wish to use the automatic
On/Off timers.
1. Press the MENU button to display the menu. Press the
select "Setup", then press the ENTER/OK button.
2. Press the or button to select "Time", then press the ENTER/OK button.
3. Press the ENTER/OK button to select "Clock Set".
4.
To...
Move to "Hour" or "Minute"
Set the "Hour" or "Minute"
Press the ENTER/OK button.
5. Press the EXIT button to exit.
If you disconnect the power cord, you have to set the clock again.
You can also set hour and minute by pressing the number buttons on the remote control.
English-20
Audio Type DUAL 1/2
Mono MONO
STEREO ↔ MONO
Stereo
DUAL 1 ↔ DUAL 2
Dual
Mono MONO
MONO ↔ STEREO
Stereo
MONO ↔ DUAL 1
Dual
DUAL 2
or button to
Default
Automatic
change
DUAL 1
Automatic
change
DUAL 1
or button to
Press the...
or button.
or button.