Intended Use; Connecting And Operation; Connecting - Goobay 58969 Mode D'emploi

User manual
3

Intended Use

accidents, injuries, and damages to persons and property.
4

Connecting and Operation

4.1

Connecting

13
We do not permit using the device in other ways like described
in chapter "Description and Function" and „Safety Instructions".
Use the product only in dry interior rooms. Not attending to
these regulations and safety instructions might cause fatal
Risk of injury by stumbling and falling
• Mind placing cables in a way, nobody will be
disabled and the cable not be damaged.
• Install the system and devices attached to it in a way that
persons cannot be injured, or objects not be damaged for
example by dropping or stumbling.
Material damage due to wrong placement and
wrong voltage supply
• Only place on non-slipping surface.
• Use only the supplied power supply.
1. Check the scope of delivery for completeness and integrity.
2. Compare the specifications of all equipment to be used and
ensure compatibility
3. First connect your source devices to the S-video or
composite RCA connection of the RCA/HDMI™ Converter
(yellow = video, red = audio right, white = audio left).
4. Connect the HDMI™ cable of your output device to the
HDMI™ output (6) of the RCA/HDMI™ Converter.
5. Insert the DC side of 5V power supply into RCA/HDMI™
Converter and then connect the AC side of the power
supply into the wall outlet.