Publicité
Les langues disponibles
Les langues disponibles
CyCle
4
SeleCTOR
CANCel &
5
dRAIN
pOWeR
6
START & pAUSe
7
DMT300-00062A .indb 9
1
2
3
4
You can select the appropriate wash cycle depending on the soil level of your
dishes. When you select a cycle, the indicator for that cycle lights up. If you
want to cancel the selected cycle, press the selected cycle button again.
If an error occurs during an operation, an error message is illuminated with a
warning sound. Refer to the information codes page.
To cancel & drain a cycle currently running, hold down both the heavy and
delicate buttons for three (3) seconds.
When pressed, all indicator lights turn on and off and the most recently
finished cycle light lights up.
When the dishwasher is running and a selected cycle is finished, the "Clean"
light is illuminated for 10 minutes. The Power turns off automatically.
In Power on condition, close the dishwasher door and select the cycle and
desired options. Press the Start/pause button to begin the cycle.
When you want to pause the dishwasher while running, press the Start/
pause button and make sure to open the door slowly and carefully.
5
setting up your dishwasher _9
6
7
2010-08-09
11:17:41
Publicité
