Publicité
Les langues disponibles
Les langues disponibles
Status
2 LEDs light.
1 LED lights.
1 LED blinks.
1 LED blinks, the power tool is not ready for use.
4 LEDs blink, the power tool is not ready for use.
Battery state of charge cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch.
If the battery display LEDs blink, please observe the instructions given in the Troubleshooting section.
3.5
Items supplied
Reciprocating saw, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group | USA: www.hilti.com
4
Technical data
Rated voltage
Weight in accordance with EPTA Procedure 01 including B22⁄8.0 battery
Stroke rate
Stroke length
Blade holder
Ambient temperature for operation
Storage temperature
4.1
Noise information and vibration values in accordance with EN 62841
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools, or is poorly maintained, the data can vary. This can
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the total
working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise information
Sound power level (L
WA
Uncertainty for the sound power level (K
Sound pressure level (L
Uncertainty for the sound pressure level (K
Total vibration
Vibration emission value for sawing chipboard (A
Uncertainty sawing chipboard (K)
*2186516*
)
)
WA
)
pA
)
pA
2186516
Meaning
State of charge: 25 % to 50 %
State of charge: 10 % to 25 %
State of charge: < 10 %
The battery has overheated or is completely dis-
charged.
The power tool is overloaded or has overheated.
)
h,B
SR 6-A22
21.6 V
4.1 kg
2,600 /min
32 mm
0.5 in
−17 ℃ ... 60 ℃
−20 ℃ ... 70 ℃
SR 6-A22
97 dB(A)
5 dB(A)
86 dB(A)
5 dB(A)
SR 6-A22
17.5 m/s²
1.6 m/s²
English
7
Publicité
